To start, squeeze the safety lock-off H1 and then the switch lever H2. Flymo Mains Cables and Extension Cables are available from your local Approved Service Centre. . If the line extends past the line cutter, too much line has been fed out. Store in a cool dry place. This product is not intended for use by persons including Cordless Battery Powered Products require special care. If required line can be fed out manually.
Before using the machine and after any impact, check Maintenance and storage for signs of wear or damage and repair as necessary. Always return the product to its normal operating posi- tion before switching on. When initially switching on the trimmer, a small length of line is fed out. Overloading can be avoided by making sure the motor speed does not drop unduly. Rest edger on wheel for extra stability and line up the edge of the lawn with the two indicators on the guard N1.
If too much line is fed out, remove the spool cap and click spool anti-clockwiseuntil the line is at the desired length. To feed more line, it is first necessary to to allow the motor to stop completely, then re-start,allowing the motor to reach full speed. There are four symbols to choose from: an apple, an apple core, an open book with a pencil, and an alarm clock. There is an electric shock hazard if a cut off plug is inserted into a 13 amp socket. Locate the lower shaft A1 into the upper shaft A2. Depress the two buttons on the sides of the switch handle.
You site and press the blue can also pull and release release button with your the re-setting handle. Hold as illustrated in Fig H. Never operate the trimmer with damaged guards or any plug, cable connector or extension cable. Take approximately 5 metres of line. Use only genuine Flymo nylon line.
. Do not insert any object into the motor area. Do not charge the battery or use the unit in an explo- sive or corrosive environment. Do not lean over the trimmer whilst trimming or edging, objects may be thrown by the cutting line. Line is fed out automatically every time the trimmer head stops rotating and returns to operating speed.
Hold as illustrated in Fig H. Nylon line replacement and cleaning the unit are the only items suitable for user maintenance. Nylon line replacement and cleaning the unit are the only items suitable for user maintenance. Fix the 2 halves of the wheel together as illustrated in fig B1. See Product Rating Label Year of Construction. Ensure the nylon line is fed through the hole in the safety guard as illustrated in fig C1. To start, squeeze the switch lever.
To feed more line, it is first necessary to to allow the motor to stop completely, then re-start, allowing the motor to reach full speed. With the used lancet still in the lancing device,. Use the trimmer only in daylight or good artificial light. For your own safety and that of bystanders please read these instructions before operating the product. Mark results if that's required by your doctor.
Plug the charger F2 into a suitable household electrical wall socket and switch on. Check that the cap is correctly fitted by trying to re- move it without depressing the two latches. To remove spool cap 1. Only use the replacement cutting line specified for all objects such as stones, broken glass, nails, wire, 4. All Flymo connectors and cables are of splashproof construction. If too much line is fed out, remove the spool cap and click spool anti-clockwiseuntil the line is at the desired length. Follow the procedure outlined in the Initial Charging Procedure.
Do not attempt to repair the unit including the battery. Chil- dren should be supervised to ensure that they do not play with the product. Push until it clicks into position. For more detailed information about recycling of this product, please contact your local council office, your household waste disposal serv- ice or the shop where you purchased the product. Do not store the product outdoors.